Filter
Top Products
46
NET DHCP:
This option selects enable or disable for the DHCP communication function.
OFF: Disables it.
ON: Enables it.
NOTE: If provided with a DHCP server, the VR-601 can get an IP automatically by setting
this option to ON.
NET IP:
This option is used to configure the Ethernet communication settings. This is required for the purpose
of making a network connection. Please consult with a qualified MIS professional to configure it.
IP: XXX
.XXX.XXX.XXX
MASK: XXX
.XXX.XXX.XXX
GATEWAY: XXX.XXX.XXX.XXX
FTP SETTING:
This entry allows users to set the FTP File Transfer Protocol.
ENABLE:
This option is to select enable or disable for the FTP function.
ON: Enables it.
OFF: Disables it.
REC MODE:
This option determines the recording mode to be recorded when the FTP function occurs. There are 2
levels of recording mode to choose: ALARM REC and ALL REC.
ALARM REC: Only to record the alarm-event recorded video.
ALL REC: To record all the recorded video.
NOTE: When the alarm input is used, please set REC SETTING of FTP to ALARM REC.
When the alarm input is not used, please set it to ALL REC.
NOTE: If the interval between REC and the following REC is too short in ALL REC setting,ʳ
or if the interval between ALARM OUT and IN is too short in ALARM REC setting,
FTP might not work correctly.
COMM SETTING
COMM ID : 01
RS232 : ON
RS485 : ON
NET ENABLE : OFF
NET DHCP : OFF
NET IP : SET
FTP SETTING
MAIN PAGE
NAS FTP RECORDING
FTP SETTING
ENABLE : OFF
REC MODE : ALARM REC
REC RATE : 1 F / 1 S
ACCOUNT : SET
MAIN PAGE
SET FTP ON / OFF
47
REC RATE:
This option determines the recording rate to be recorded at when the FTP function occurs. There
are 4 levels of recording rates to choose from: 1 F / 1 S, 1 F / 10 S, 1 F / 30 S and 1 F / 60 S.
NOTE: An actual transfer interval could be stretched in some environment.
ACCOUNT:
This option is used to configure the FTP account settings. This is required for the purpose of
making a FTP connection. Please consult with a qualified MIS professional to configure it.
FTP IP : Every FTP server has to own an IP address to be identified on the network. Input
the IP address of the FTP server.
USER : Input the FTP user name (Login Name).
PASSWORD : Input the FTP password (Password).
PATH : Input the upload path while doing the FTP.
NOTE: For valid settings, please reboot the DVR after changing the FTP ACCOUNT.
FTP ACCOUNT
FTP IP : 192.168.001.128
USER : [ dvr
]
PASSWORD : [ 00000000 ]
PATH : [ /dvrvideo ]