Filter
Top Products
16
FIRST INSTALLATION
Screen display
Here you select the type of screen display, depending on the setting of your TV format:
- TV format “4:3”: Pan & Scan or Letterbox
- TV format “16:9”: Always 16:9 or automatic
TV Scart signal output
Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.
- CVBS – Colour Video Baseband Signal
- RGB – Red/Green/Blue signal or
- Y/C – S-Video signal (luminance/chrominance)
Press the
!
(green) button to move to the next menu.
The following display appears:
Select the setting here to match your reception system using the
buttons. You have the following
options:
- DiSEqC™1.0
- LNB only
- One cable or
- CAP (see installation and operating instructions for your CAP unit)
Now continue with the fi rst installation chapter that applies to your reception system.
When selecting the LNB type in the setting that applies to you, note that “Wideband”
is available only for the “single-cable system” setting!