Filter
Top Products
18
LNB settings
Here use the
buttons to select the LNB
type used in your system. The choice is between
“Universal” and “User-defi ned”.
Universal:
No further input required, since all necessary
frequency ranges are covered by a universal LNB.
User-defi ned:
If you choose not to use a universal LNB, you must
here set the frequency ranges for which your LNB
was confi gured.
Use the
buttons to select the frequency range
to be changed (low, high or limit frequency).
Use the
buttons or the digital input buttons
to set the exact frequency for which your LNB was
confi gured.
Test transponder
To check whether the settings that you have
made are correct, use the
buttons
to move to the “Test transponder” fi eld.
Use the
buttons to select the required
transponder from the various ones listed. If your
settings are correct, you will see at the top right
of the screen the live signal of a channel for the
currently selected transponder.
If you are not receiving a signal, check your
settings again and if necessary call for expert
help.
Use the
buttons to select how many
satellites (max. 4) you would like to receive with your
reception system. The following display appears
(example):
Use the
buttons to select the fi rst satellite
slot. Press
to access the menu for the
satellite settings. The following display appears
(example):
FIRST INSTALLATION