58
BLOCK CHANNELS
Use the
buttons to select the channel to be blocked in the Favourites List you have selected.
Press the
button to call up the edit menu and use the
buttons to select the “Lock” function.
Confi rm the command by pressing the
button. you are now prompted to enter the PIN code
(factory default setting: 0000).
The channel you previously selected is now shown with a padlock to its right. In future this channel can
be viewed only by inputting the four-digit PIN code.
The channel is also blocked on all other channel lists. You need not additionally block the channel in the
other channel lists.
This function can be restored again using the edit menu (select: “Remove lock”).
RENAME FAVOURITE LIST
Use the
buttons to select the Favourites List to be renamed. Press the
button to call
up the edit menu and use the
buttons to select the “Rename Favourites List” function. Confi rm
the command by pressing the
button. A keypad will now be displayed with which you can enter
the desired name alphanumerically using the numeric pad on the remote control. See also the section
“Operating Instructions”, “Alphanumeric Input”.
START BLOCK HIGHLIGHTING (HIGHLIGHTING SEVERAL CHANNELS)
Use the
buttons to select the channel from which you want to highlight further channels. You can
only select channels that are listed in succession in your selected Favourites List. Press the
button
to call up the edit menu and use the
buttons to select the “Start blockselection” function. Now use
the
buttons to highlight the desired channels, starting from the previously highlighted channel
and working upwards or downwards. The highlighted channels will be highlighted in yellow and marked
with a tick at the left side.
When you have highlighted the channels that you wish to select, press the
button to call up the edit
menu once again and use the
buttons to select the desired function (“Remove from the Favourites
List” or “Remove lock”).
The selected function can now be used in the same way as described for the respective items in this
section for a single channel.
EDIT CHANNEL LIST