Filter
Top Products
69
SETTINGS
Use the
buttons to select the time after which you want the on-screen channel message display
to be automatically cancelled. The selections available are “Off”, 1, 2, 3, 4, 5 or 6 seconds.
DISPLAY DURATION OF CHANNEL MESSAGE
Use the
buttons (On/Off) to specify whether the volume bar is displayed when adjusting the
volume.
DISPLAY VOLUME BAR
Use the
buttons to set the brightness of the receiver front display. Select the most comfortable
setting for the ambient lighting.
RECEIVER FRONT DISPLAY BRIGHTNESS
Use the
buttons to set whether the receiver front display should be switched on or off in stand-by
mode (display of time).
RECEIVER FRONT DISPLAY IN STANDBY
Press the
button to align the on-
screen displays on the TV screen.
Now you can use the cursor buttons
(
) to determine the position
of the on-screen display. When you have
achieved the desired position, press the
button to fi x the selected position.
OSD POSITION ALIGNMENT
Here you can confi gure the functional scope of your receiver. You can choose between “High”, “Normal”
and “Low”. The following table shows which functions are available at each confi guration step.
FUNCTIONAL SCOPE
(red) button
"
(yellow) button
#
(blue) button
button
button
High Select favourites Select options TV/Radio AV changeover Channel list
Low Not assigned Not assigned Not assigned Not assigned Programme Guide
Normal Select favourites Select options TV/Radio Not assigned Programme Guide