Filter
Top Products
20
FIRST INSTALLATION: One cable
Use the
buttons here to select “One cable” as the “System”. Press the
button to move to the next
menu item. The following display appears:
Number of satellites
Use the
buttons to select how many satellites (max. 2) you would like to receive with your reception
system. Press the
button to move to the next menu item.
Confi gure satellites
Press the
button to open the menu. The following display appears:
Satellite and Position
Use the
buttons to select the fi rst satellite (satellite 1 of 2, depending on the setting) as shown on
the screen.
LNB settings
Here use the
buttons to select the LNB type used in your system. The choice is between “Universal”,
“Wideband” and “user-defi ned”.
If in your reception system you use a single-cable LNB (e.g. UAS 481 from Kathrein), please select
here the setting “Wideband”. If you use a single-cable matrix (EXU 908) or a single-cable switching
matrix (EXR 551 or EXR 552) from Kathrein, the LNB you use must be a “Universal LNB”!
The various options for a
single-cable system with
Kathrein components
are summarised at the
end of this manual in the
“Technical Appendix”
sectionunder “Examples of
Single-Cable Systems”.