Filter
Top Products
17
Satellite and position
Use the
buttons to select the desired satellite
whose signal is to be received by the tuner.
When you have selected your desired satellite,
use the
buttons to switch to the selection of
the “LNB Type”.
System
Select the setting here to match your reception system using the
buttons. If your reception system
is DiSEqC™-capable, at System select “DiSEqC™ 1.0” (allows switch-over from receiving one satellite
to receiving another one). If your reception system is DiSEqC™-capable, select the setting “LNB only”.
Press the
button to move to the next menu item.
For ease of understanding, the further explanations of the fi rst installation are split into two columns.
The description on the left refers to installation of a non-DiSEqC™-capable system and on the right
to installation of a DiSEqC™-capable system.
FIRST INSTALLATION
Number of satellites
Press the
button to select the satellite to be
received.
The following display appears:
When selecting the
satellite(s), make sure
that your reception
position is aligned to
the desired satellite(s)!
The fi rst
installation with a
CAP 900 automatic turntable unit
is explained in the installation
manual supplied with the turntable
unit.