Filter
Top Products
Basic Operation
27
Chapter 3: Basic Operation
[
During playback of MP3 disc
]
File
: Repeat playback of the file being played.
Folder
: Repeat playback of the folder being played.
Disc
: Repeat playback of the disc being played.
All
: Repeat playback of all discs in the tray.
Off
: Repeat playback Off.
[In the program mode]
·
Pgm
: Repeat playback of programmed contents.
Off
: Repeat playback Off.
[In the random mode]
‚
Rnd
Off
: Repeat playback Off.
A-B repeat playback
A-B repeat playback allows you to play a specified section
repeatedly. (A-B repeat playback is also available with
the OSD operation. ›)
A-B repeat playback may sometimes be unavailable
during playback of certain DVD.
1. Set the mode switch of the joystick remote to the
Purple position.
2. Press
8
A-B REPEAT
+10
during playback to display the "MAIN"
OSD. Repeat icon
A B
is displayed and the current
disc position is stored in memory as point A where
the repeat playback is to be started.
¶ The "REPEAT" and "
A
3" indicators in the display
light up.
3. When point B where you want to stop repeat playback
comes, press
8
A-B REPEAT
+10
again. Repeat icon
A B
is
displayed and repeat playback of the section between
points A and B starts.
¶ The "REPEAT" and "
A
3
B
" indicators light in the
display.
¶ To cancel repeat playback and return to normal
playback, press the A-B REPEAT button during A-B
repeat playback. The "REPEAT" and "
A
3
B
"
indicators turn off and normal playback starts.
¶ This operation is not available with a DVD with which
the elapsed play time information is not displayed.
¶ A-B Repeat playback can be used only within a
same title. (DVD Video)
¶ A-B Repeat playback can be used only within a
same track. (DVD Audio)
Pure Audio function
It blocks the video signal to prevent interference between
the video and audio signals so pure audio can be
reproduced by switching the Pure Audio function On.
When the video signal is blocked, the TV screen shows
no picture during audio playback.
Press
PURE
AUDIO MODE
on the player main unit to switch the Pure
Audio function on/off.
¶ When you are operating the joystick remote, set
the mode switch to the Blue position then press
the P.AUDIO button.
¶ When the Pure Audio function is activated, the
PURE AUDIO MODE button on the player main
unit lights up. Pressing the button again switches
the Pure Audio function off and turns the indicator
off.
¶ When an operation for displaying the on-screen
message (the display of the performed operation
contents on the TV screen) or OSD is performed,
the video signal is output temporarily.
¶ With some DVD and VCD discs, the menu may be
displayed.
: Repeat playback according to the current random play
mode.
¶ This operation is not available with a MP3 disc.
¶ This operation is unavailable in the all-random and
program modes.