Filter
Top Products
Various Setups
53
Chapter 6: Various Setups
"IPB Display" Setting
With the MPEG2 which is one of the video display
methods of DVD, each picture is divided into the
following three picture types before being coded in digital
signal.
I-picture (in-frame coding): This is the standard video
and can constitute a picture by itself. As the highest
picture quality can be obtained, the still image of I-
picture is most suitable for use when adjusting the
picture quality.
P-picture (forward prediction coding): Picture cal-
culated based on past pictures (I-picture or P-picture).
B-picture (bidirectional prediction coding): Picture
calculated by comparing the previous and next pic-
tures (I-pictures or P-pictures). This picture type con-
tains least amount of video information.
When IPB Display is set to "On", the I, P or B type of
DVD still picture is displayed on the TV screen to help
identify whether the picture is I-picture, P-picture or B-
picture. This makes it possible to find the I-picture which
is the standard video containing most amount of
information.
At the factory, the player has been set to "Off" with which
the IPB display is not shown.
Setting items
" " : Select to return to the previous screen.
"On" : Select to view the IPB display.
"Off" : Select to not to view the IPB display.
Operation procedure
1. Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
to
display the "MAIN" menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "IPB Display" by tilting
the joystick up or down and press
ENTER
.
7
7
On
7
Off
OSD Position
On Screen Message
IPB Display
TV Aspect
TV Mode
TV Monitor Type
DVD VIDEO Mode
Rating
5. Select "On" or "Off" by tilting the joystick up or down,
then press
ENTER
to enter the selection in memory.