Filter
Top Products
Various Setups
61
Chapter 6: Various Setups
Operation procedure
1. Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
and tilt
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "Dynamic Range Control"
by tilting the joystick up or down and press
ENTER
.
7
Wide
7
Normal
7
Midnight
7
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
5. Select the level by tilting the joystick up or down, then
press
ENTER
to enter the selection in memory.
7
Filter 60kHz
7
Filter 110kHz
7
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
5. Select "Filter 60 kHz" or "Filter 110 kHz" by tilting
the joystick up or down, then press
ENTER
to enter the
selection in memory.
"Audio Filter" Setting
DVD AUDIO is recorded with a maximum sampling rate
of 192 kHz and theoretically capable of reproducing up
to 96 kHz. As a result, the speakers used may be damaged
if they are not compatible with high frequencies. When
an ordinary speaker system is connected, set the "Audio
Filter" setting to "Filter 60 kHz" to protect the speakers.
When the speaker in use are compatible with high
frequencies, set this setting to "Filter 110 kHz". (For
details, refer to the instruction manuals provided with
your speakers.)
At the factory, the player has been set to "Filter 60 kHz"
to protect the speakers from damage.
Setting items
" " : Select to return to the previous screen.
"Filter 60 kHz" : Select when the speakers in use are
not suitable for reproduction of high frequencies.
"Filter 110 kHz" : Select when the speakers in use
are suitable for reproduction of high frequencies.
Operation procedure
1. Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
and tilt
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "Audio Filter" by tilting
the joystick up or down and press
ENTER
.