Filter
Top Products
Basic Operation
28
Chapter 3: Basic Operation
Switching the audio language
When a VCD or a DVD containing the recording of audio
in multiple languages is played, the language used in
the voice can be switched over. (The audio language can
also be switched by the OSD operation. fi)
1. Set the mode switch of the joystick remote to the
Purple position.
2. Press
P.AUDIO
AUDIO
7
during playback to display the "SOUND"
OSD. Each further press of the button switches the
displayed
ENG 5.1ch
1 Dolby
(Audio icon).
¶ With a DVD AUDIO disc, an audio language
number can be selected from up to 2 numbers.
¶ With a DVD VIDEO disc, an audio language
number can be selected from up to 8 numbers.
¶ With VCD, "STEREO", "L", "R" or "L+R" can be
selected.
¶ The default audio language set by the user is
selected when the power is turned on or the disc is
changed. If the default language is not contained
in the disc, the priority language defined for the
disc will be played back.
¶ The above operation is not available in stop mode.
It is also unavailable with ordinary music CD(CD-
R/RW)s.
Using Headphones
Connect stereo headphones (with a standard stereo
phone plug) into the PHONES jack and adjust the
volume level with the PHONES LEVEL knob. The player
incorporates the headphone Virtual Surround facility
allowing the use of surround audio through
headphones.fi
PHONES LEVEL
MIN MAX