Filter
Top Products
Various Setups
51
Chapter 6: Various Setups
"OSD Position" Setting
When the connected TV is a widescreen TV, the OSD (On-
Screen Display) or on-screen messages may be displayed
incorrectly or overflow outside the screen depending on
the TV screen mode setting. The OSD position switching
makes it possible to display the OSD and on-screen
messages normally.
At the factory, the player has been set to "Normal".
Setting items
" " : Select to return to the previous screen.
"Normal" : Select to display the OSD and messages
on the top of the TV screen. Usually select this
setting.
"Cinema" : Select to display the OSD and messages
on the lower part of the TV screen. Select this setting
when the OSD or messages are deviated outside
the TV screen.
Operation procedure
1. Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
to
display the "MAIN" menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
"DVD VIDEO Mode" Setting
When playing a disc in which DVD VIDEO and DVD
AUDIO are mixed, this setting makes it possible to select
whether the DVD VIDEO part or DVD AUDIO part is to
be played. To reproduce only the DVD VIDEO part, set
this item to "On".
At the factory, the player has been set to "Off" with
which the DVD AUDIO part is played back.
Setting items
" " : Select to return to the previous screen.
"On" : Select to play only the DVD VIDEO part in a
DVD VIDEO/DVD AUDIO mixed disc.
"Off" : Select to play only the DVD AUDIO part in a
DVD VIDEO/DVD AUDIO mixed disc.
Operation procedure
1. Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
to
display the "MAIN" menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "DVD VIDEO Mode" by
tilting the joystick up or down and press
ENTER
.
7
On
7
Off
7
OSD Position
On Screen Message
IPB Display
TV Aspect
TV Mode
TV Monitor Type
DVD VIDEO Mode
Rating
5. Select "On" or "Off" by tilting the joystick up or down,
then press
ENTER
to enter the selection in memory.
¶ This setting is reset to default "Off" when the disc
is changed or the power is set to off or standby.