Filter
Top Products
Various Setups
57
Chapter 6: Various Setups
6. Each press of the
ENTER
button turns on and off the
corresponding speaker icon in the graphic room at
the lower half of screen alternately. When the selected
kind of speaker is to be used, the corresponding
speaker icon should be displayed.
Test
SL
C
SW
R
R
RSLS
SR
Exit
L
L
SW
C
Speaker Setting (Quick)
7. To set the use of other kinds of speakers, repeat step
5 for each of them.
8. After completing the setting, place the cursor on "Exit"
and press
ENTER
.
"Speaker Setting (Custom)"
Setting items
Front speakers (L, R)
Size: "Large"
Level: "0 dB"
Center speaker (C)
Size: "Large"
Use of center speaker: Used
Level: "0 dB"
Delay time: "0 ms"
Surround speakers (SL, SR)
Size: "Large"
Use of surround speakers: Used
Level: "0 dB"
Delay time: "0 ms"
Subwoofer
Use of subwoofer: Used
Level: "0 dB"
Operation procedure
1. Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
and tilt
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "Speaker Setting
(Custom)" by tilting the joystick up or down and
press
ENTER
.
5. Set each speaker by tilting the joystick up/down and
to the left/right. Select the item to be set and press
ENTER
.
0 dB
0 dB
0 dB 0 dB
0 ms
SL
R
SR
0 ms 0 dB0 dB
L
SW
C
Speaker Setting (Custom)
Test
C
SW
R
RSLS
Exit
L
To set the front speakers: Select and adjust "L" or
"R". The other, non-selected front speaker will
automatically set to the same setting as the selected
speaker.
To set the center speaker: Select "C".
To set the surround speakers: Select and adjust
"SL" and "SR" separately.
To set the subwoofer: Select "SW".
To output the test tone: Select "Test"
To exit from the screen: Select "Exit"
6. Select the desired speaker setting by tilting the joy-
stick up/down and to the left/right.
If " " is selected, the screen in step 5 appears again
without entering the performed changes in the
speaker setting in memory.
[Front Speakers setting]
0 dB
0 dB
0 ms
0 ms 0 dB0 dB
SL
R
SR
L
SW
C
L
Speaker Setting (Custom)
Exit
Size
Normal
Large
0 dB 0 dB
dB
-12-11-10
-9 -8 -7 -6 -5 -4 -3 -2 -1 0
Level
Size: Select "Normal" when the connected speaker
is incapable of reproducing audio below 100 Hz.
Select "Large" when the connected speaker can
reproduce audio below 100 Hz.
Level: Set the volume level.(0 ~ -12 dB)
After completing the speaker setting, select "Exit"
to enter the setting and return to the screen in step
5.