Filter
Top Products
Configure TV Type
Configure the DVD Standard to match your television aspect ratio
(4:3 standard or 16:9 wide-screen) through the setup menu. Follow
these steps:
a. Turn on your television or video monitor.
b. Press the power button (1) or key (38) on the DVD Standard.
The blue power LED (2) illuminates.
c. Press the setup button on the front panel (19) or the setup key on
the remote control (44). The setup menu appears on the video
display. The configuration option is highlighted.
d. Press the
ᮣ button (16) or key (45) to reveal configuration
options.
e. Press the
ᮡ button (16) or key (45) to select TV TYPE
. Choose
standard screen size 4:3 LT (letterbox with black box at the top
and bottom margin of the screen), standard screen size 4:3 PS
(pan and scan picture extends to the screen margins) or 16:9
(wide-screen).
f. Press the setup button or key to exit the setup menu.
Stop disc playback before changing the aspect ratio. Changes will not
take effect while disc is being played.
After you have connected and configured your video monitor and the
DVD Standard, you’re ready to connect the rest of your system. See
Connecting the DVD Standard to Your System, on page 25.
Krell DVD Standard 9
Getting Started, continued
Step 4
IMPORTANT