Filter
Top Products
Krell DVD Standard 31
1. Connect the DVD Standard to your video monitor; see Getting
Started, on pages 6-9.
2. Connect the AC power cord to the IEC power connector (37) on
the DVD Standard back panel and to the AC wall receptacle. The
red stand-by LED (3) illuminates.
3. Press the power button (1) or key (38). The blue power LED (2)
illuminates, indicating that the DVD Standard is in the operational
mode.
4. Press the setup button (19) or key (44). The
SETUP MENU
screen
appears.
System Setup
ACCESSING THE
SETUP MENU
Access to the setup menu is available through the front panel setup
button or through the remote control.
The only system setup you need to complete before playing your
DVD Standard is configuring television type. See Getting Started,
on pages 6-9 for instructions. The other items in the setup menu are
optional and may be set up at your convenience. Krell encourages
you to use the setup menu to optimize the performance of the DVD
Standard with your system.
This section explains menu navigation and guides you through each
section of the system setup menu.