Krell Industries DVD Standard DVD Player User Manual


 
18 Krell DVD Standard
Back Panel Description, continued
37 IEC Connector
The DVD Standard is equipped with a standard female IEC power
connector, for use with the AC power cord.
POWER
36 12 VDC Out and In
The 12 VDC output sends a 12 Volt power on/off signal to other Krell
components via a 12 V cable, as well as to other devices that incor-
porate a 12 V power on/off trigger input. The 12 VDC input receives
12 Volt power on/off signals from other Krell components and devices
that incorporate a 12 V trigger. The 12 VDC out and in connections
let you control the operational and stand-by modes of components
with 12 V triggers allowing whole systems or parts of systems to be
easily coordinated.
BACK PANEL
REMOTE CONNECTIONS,
continued
Notes
When the DVD Standard is in the operational mode, 12 VDC output
provides 12 V of DC output. When the DVD Standard is in the stand-by
mode or off, DC output is 0 V.
12 VDC Out (12 V trigger) current is limited to 30 mA.
Consult the owner’s manual of each component used in a custom installa-
tion to take full advantage of the DVD Standard’s remote capability.