Filter
Top Products
3 Using Your
TracVision LF/SF
For TracVision LF/SF to receive the satellite signals, the antenna
must have a clear line of sight to the satellite. If you only receive
intermittent signals or the antenna cannot find the satellite, check
around your vehicle for any objects that could be blocking the
signal, such as trees, buildings, highway overpasses, etc.
You must also be located within the selected satellite’s coverage
area in order to receive its signal. Refer to your satellite television
service manual to check the viable coverage area. For your
convenience, KVH provides links to several web sites that offer satellite
coverage information. Simply go to our web site at: www.kvh.com/
footprint.
3.1 Turning On the System
The TracVision LF/SF system is easy to use. To turn on the
TracVision LF/SF system, follow the steps below.
1. (TracVision SF only) Park your vehicle.
2. Turn on the IRD and the television. (Refer to your
IRD user manual for complete operating
instructions for the IRD.)
3-1
Using Your TracVision LF/SF
54-0194 Rev. D
Figure 3-1
Be Aware of Objects that Might
Block the Satellite Signals
The TracVision SF antenna is
designed for stationary use only. As
such, the TracVision SF will track
the desired satellite while your
vehicle is parked, but not while the
vehicle is in motion.