Filter
Top Products
Picture
Before you begin:
You must set Home in Location. L p. 32
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Z (Home) and use H I J K to select Setup then press
OK.
2
Use H I to select Picture, then press OK.
Color alignment
Personal
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
Software
Installation
Features
Sound
Picture
USB
3
Use H I J K to select the item you want to adjust, then press
OK.
●
The following picture settings can be configured. Depending on
the format of the picture Source, some picture settings are not
available.
Auto picture
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game,
Energy saving and Internet video)
When you adjust the following settings, Personal
picture will be set automatically.
J Cursor Cursor K
Backlight
to Reduce Power
Consumption and
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast to Increase Contrast
Brightness
to Decrease Brightness to Increase Brightness
Color
to Decrease Color
Intensity
to Increase Color
Intensity
Tint
to Add Red to Add Green
Sharpness
to Soften to Sharpen
Advanced settings
to select the desired Setting, then press OK
(Color alignment, Noise reduction, Light
sensor*, Black stretch, Dynamic contrast,
Gamma, BMR 120, MPEG artifact reduction,
Color enhancement, Custom color
management and Film mode)
Picture format
Automatic
Changing Picture
Format L p. 22
Super zoom
4:3
Movie expand 14:9
Movie expand 16:9
Wide screen
Unscaled
Mode selection
PC
to Turn Off image
enhancement features
which makes the TV to
act purely as a monitor
HDTV
to enable image
enhancement features
to improve picture
quality
Auto adjustment
to adjust the Horizontal / Vertical position, Clock
and Phase of the PC screen automatically
J Cursor Cursor K
Clock
to Decrease setting
value
to Increase setting
value
Phase
Horizontal
position
to move PC screen left
to move PC screen
right
Vertical position
to move PC screen
down
to move PC screen up
* 55MV314X, 50MV314X, 43MV314X, 40MV324X only.
You can set a Particular Picture Quality using Advanced settings.
Off
Medium
Medium
Medium
On
Auto
Mode
Gamma
Dynamic contrast
Black stretch
Light sensor
Noise reduction
Color alignment
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
MPEG artifact reduction
BMR120
*
Color
alignment
Mode
to set the color temperature to Personal,
Cool, Normal and Warm.
When you adjust the following settings,
Personal will be set automatically.
J Cursor Cursor K
Red gain
to Decrease Red
Contrast
to Increase Red
Contrast
Green gain
to Decrease Green
Contrast
to Increase Green
Contrast
Blue gain
to Decrease Blue
Contrast
to Increase Blue
Contrast
Red offset
to Decrease Red
Brightness
to Increase Red
Brightness
Green
offset
to Decrease Green
Brightness
to Increase Green
Brightness
Blue offset
to Decrease Blue
Brightness
to Increase Blue
Brightness
Noise
reduction
to select the desired setting, then press OK
(Off, Minimum, Medium, Maximum and Auto)
Light
sensor *
Off
to set Light sensor to Off
On
to adjust backlight for the best picture
quality by dynamically adjusting the
backlight intensity in accordance with
lighting condition in the room
Black
stretch
to select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
25 .English
Continued on next page.