Filter
Top Products
Dynamic
contrast
to select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Gamma
J Cursor Cursor K
to adjust the gamma encoding of images
BMR 120
Off
to Set BMR 120 to Off
On
to Make the Video appear smooth
MPEG
artifact
reduction
to select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Color
enhancement
Off
to set color enhancement to Off
On
to make colors more vivid and bright
Custom
color
management
to select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
J Cursor Cursor K
Tint
to rotate only
selected color tint
in clockwise
direction
to rotate only
selected color tint
in
counterclockwise
direction
Saturation
to decrease color
with only selected
color
to increase color
with only selected
color
Brightness
to decrease
brightness with
only selected color
to increase
brightness with
only selected color
Film mode
Off
to set film mode to Off
Auto
to optimize the picture recorded by the
original film
Note(s)
●
Mode selection is available only if
–
the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–
the connected HDMI device is outputting a video signal.
●
Adjusts Backlight for the Best Picture Quality by Dynamically Adjusting the Backlight
Intensity in accordance with the Room Lighting Condition when the Light sensor* feature
is Set to On. Please ensure the Room Lighting is Stable and the Light Sensor is Not Blocked.
* 55MV314X, 50MV314X, 43MV314X, 40MV324X only.
Sound
Before you begin:
You must set Home in Location. L p. 32
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Z (Home) and use H I J K to select Setup then press
OK.
2
Use H I to select Sound, then press OK.
Software
Installation
Features
Sound
Picture
USB
On
On
Off
Start now
Personal
Digital output format
Headphone volume
TV speakers
Auto volume leveling
Balance
Equalizer
Auto sound
DTS TruSurround
Multichannel
3
Use H I J K to select the item you want to adjust, then press
OK.
The following sound settings can be configured. Depending on the format
of the broadcasting, some sound settings are not available.
Auto sound
to select the desired Setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
When you adjust the following settings
(Equalizer, DTS TruSurround and Auto volume
leveling), Personal sound will be set
automatically.
Adjust the tonal quality for each frequency.
Equalizer
J Cursor Cursor K
to select the specific frequency using H I, and
use J K to Adjust the Level, then press OK.
Adjust the speakers to suit your listening preference.
Balance
J Cursor Cursor K
Adjusts the balance of the Right and Left speakers
to Best suit your listening position.
Digital / Digital Cable (ATSC) TV Operation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
Digital audio
language
to select the language according to your
preference.
(It differs depending on the program.)
Cable / NTSC (Analog) TV Operation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Alternate audio
Main
to output main-audio
SAP
to output second-audio program
26 .English
Continued on next page.