EN 37
1
Access Main Menu screen
Press MENU.
2
Access Guide Channel Set screen
1 Press
@ #
move
the arrow to
“INITIAL SET
UP”, then press fi
or OK.
2 Press
@ #
to move
the arrow to
“GUIDE
CHANNEL”, then press fi or OK.
3
Input guide channel number
Press
@
#
to input the
VCR Plus+ guide
channel number as
shown in the TV
listing.
● If you receive your
channels with a
cable box and if
you have properly
set your Controller,
“CABLE CH” appears in place of “VCR CH”. If
not, refer to pages 15 – 17 and re-perform the
procedure.
In that case, it is possible to change the channel
by 10 channels by pressing and holding
@ #
in
steps 3 and 4.
4
Input receiving channel number
Press %fi to move
the arrow to “VCR
CH”, then press
@
#
to input the number
of the channel on
which the guide
channel’s broadcasts
are received.
● Repeat steps 3 and
4 for each
instance.
5
Return to normal screen
Press MENU.
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH
6
VCR CH
– –
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
(Ex.) When inputting the
guide channel number 6
for WNJU(Ind.)
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH
6
VCR CH
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
– –
(Ex.) If WNJU(Ind.) is
received on channel 47
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH
6
VCR CH
47
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
HM-DH40000U-EN34-41 1/23/3, 5:22 PM37