Marantz MV8300_U1B VCR User Manual


 
EN 41
Other Useful functions for timer recording
You can also use the following functions for timer
recording.
Auto Timer ( pg. 57)
When “AUTO TIMER” is set to “ON”, the timer recording
standby mode is automatically engaged when the VCR is
turned off. It is temporarily canceled when the VCR is
turned on. You do not have to press TIMER () to engage
or disengage the timer recording standby mode.
Auto SP = EP Timer (S-VHS/VHS only) ( pg. 57)
If there is not enough tape to record the entire broadcast
for recording in SP mode, the VCR automatically switches
to EP mode to allow complete recording. This feature is
especially handy when recording a broadcast of more than
2 hours in length.
ATTENTION
If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.
Pattern 1: The program with the lower program
number will be recorded.
Pattern 2: The program starting earlier will be
recorded.
Pattern 3: The program starting earlier will be
recorded, followed by the remaining portion
of the other program.
10:00
11:00
12:00
CH10
CH40
Program 1
Program 2
Not recorded
10:00
11:00
12:00
CH10
Program 2
Not recorded
Program 1
CH40
10:00
11:00
12:00
CH10
CH40
Not recorded
Program 1
Program 2
HM-DH40000U-EN34-41 1/22/3, 4:39 PM41