Filter
Top Products
User Guide
11
2. Adjusting the Settings
The RC3200 settings can be adjusted in the Setup mode.
1 Press and hold the Mode button for 3 seconds.
The Mode screen appears.
2 Tap Setup in the Mode screen.
The first Setup page appears.
The RC3200 settings consist of 3 setup pages with several settings
per page. Use the Page Up and Page Down buttons to navigate to
the appropriate setup page.
First Setup Page
On the first setup page you can adjust:
• the LCD timeout;
• the backlight timeout;
• the beep volume.
Adjust the LCD Timeout
The LCD timeout indicates how long the LCD touch screen stays
active before it turns off. The LCD will only time out when you don’t
touch any buttons. You can set the timeout between 1 second and
120 seconds.
Press ‘+’ to increase or ‘-’ to decrease the
time the LCD stays active.
Tap ‘+’ or ‘-’ once to adjust the timeout
1 second up or down.
Press and hold ‘+’ or ‘-’ to adjust the
timeout per 10 seconds up or down.
Setting Up Your RC3200