Filter
Top Products
User Guide
3
Introduction
1. Installing the Batteries
Before you use the RC3200 (and whenever the batteries run out),
you will have to install three fresh AA batteries (3 x 1.5V). You can
utilize conventional disposable or rechargeable batteries.
1 Release the catch to the battery cover by pressing it down.
2 Remove the battery cover by pulling it away from the body of
the remote control.
3 Place the batteries in the compartment.
4 Replace the battery cover, bottom first, pressing the top into
place so that the catch snaps into place securely.
Erwin to place
illustration here.
Erwin to place
illustration here.
Erwin to place
illustration here.
Erwin to place
illustration here.