Filter
Top Products
User Guide
14
Third Setup Page
RC3200 Information
This page contains information that may be important to the dealer
in case of a defect. The following information is displayed on this
screen:
• Free memory (in percentage), which gives you an indication on
how much memory is left to (further) customize the RC3200;
• Boot version;
• Application version;
• Configuration file;
• The Revert button.
The Revert Button
Warning When you revert the RC3200, all customization is lost perma-
nently. You loose all RC3200 settings, learned codes and
recorded macros.
By tapping the Revert button the RC3200 will be reverted to the
default configuration. Reverting to the original configuration restores
the RC3200 to its initial state. You might have to revert when you
notice that scrolling through pages is slowing down. This might be
the case when you have added a lot of commands to the RC3200.
1 Tap the Revert button.
A message screen appears to confirm or cancel the revert pro-
cess.
2 Press OK or Cancel.
To Exit Setup Mode
1 Press the Mode button.
The Mode screen appears.
2 Tap the mode button you want to go to.
RC3200 switches to this mode. See also ‘Working with Modes’
on p. 10.
Learning Commands
Setting Up Your RC3200