Filter
Top Products
User Guide
15
3 Learning From Other Remotes
Overview of Learning
If you own any non-Marantz components, you can program
RC3200 to reproduce IR signals from your existing remote controls
via RC3200’s learning eye. To do this, place RC3200 and the
device’s remote control on a flat surface, 1 to 4 inches (2 to 10 cm)
apart.
To learn commands from other remote controls, RC3200 has to be
in Learn mode. Switching to Learn mode is only possible from a
specific device, not from the Home Pages. See “The Mode Button
and the Mode Menu” on p. 10.
Per device you can learn all soft and hard buttons on the RC3200,
except for:
• the Backlight button;
• the Back and FWD buttons;
• the Page Up and Page Down buttons;
• the Mode button;
• the “S” (Status) button;
• the Home button.
Setting Up Your RC3200
1 to 4 inches (2 to 10 cm)