Filter
Top Products
'IV" + audio system
equipment you will need
To hook up an audio system, you will need:
• One set of RCA pin audio cables.
procedure
0
Connect the audio cables to the
AUDIO OUTPUT terminals on
the back of the TV. Use the red
cable to connect the right (R)
channel and the white cable to
connect the left (L) channel.
IIo-/
O Connect the other ends of these cables to the AUX IN terminals
on the back of the audio system.
O Turn off the television's speakers. To do this, press the AUDIO
function button on the remote control until you see the
"Speaker" display. Set the speakers to "Of?' by pressing the
ADJUST buttons. See "A_usting the sound," on page 54.
Set the audio system's input to the "ALE_" position.
-- White Lead
[_ RedLead O
Audio System Rear Terminals
AUX
---},- L (_)
--}'- R (_
TV Rear Tern-inals
-- White Lead
Red Lead
VHF/UHF
(75_)
>:hnportant: You should make this connection in addition t_ one of the other
connections in this chapter, not instead of other connections.
34 Chapter 2: Connecting Your TV