Filter
Top Products
Adjusting the color purity
Because your Mitsubishi color television has a large screen picture
tube, the earth's magnetic field can cause discolored patches on the
edges of your screen. To correct this, follow the instructions below.
O Turn off the TV set.
O Determine the compass direction where the set is facing. The
direction is determined from the front of the screen facing
forward.
J
/ :_TRENGTH DIRECTION 1
Set the DIRECTION switch according to the chart below.
STRENGTH SWITCHTV SET DIRECTION
North
North East
North West
South
South East
South West
East
West
DIRECTION SWITCtt
S NEUTRAL N
X
X
X
X
X
X
X
X
_>Important:
O Turn the TV on, and check the color performance.
- If color impurity is still present, change the STRENGTH switch
to position "1." If there is still impmfity, wait a few minutes,
then press the DEGAUSS button on the control panel.
- You must adjust the color purity switches each time you move
the TV to a new location.
- If there is still color impurity after adjusting the switches,
contact your Mitsubishi Authorized Warranty Semdce Center.
Color impurity can also be caused by unshielded speakers and
strong magnets. Move these items away from your TV.
Getting Started 37