Filter
Top Products
Using the remote control to operate cable boxes
and other brands of VCRs
operating Mitsubishi components
This TV's remote control comes programmed to operate Mitsubishi
TVs and VCRs. The select buttons (across the top of the remote )
determine which component the remote control will operate.
The following buttons are available when usi_g this TV:
• power button
• pause button
• mute control
• super quick view button
• quick view button
• volume control
• input button
• channel control
• enter button
• audio and video controls
• menu button
• cancel button
• display button
• home button
• off-timer button
• number bu_tc,ns
• PIP controls
• VCR buttons
operating VCRs or cable boxes from other manufacttvrers
The remote control is pre-set to operate Mitsubishi VCRs, but it
can also operate VCRs from other manufacturers as well. If you
have a VCR from another manuihcturer, or if y,_u have a cable box,
you should "set up" the remote control.
Each layer on the remote control (CABLE, VCF.-A, or VCR-B) can
be set for either a cable box or a VCR.
setting up the remote control to operate y,_ur VCR
O Turn off your VCR.
Press one of the select buttons across the top of the remote
control to choose the layer that you want to "set up." You can
choose between VCR-A, VCR-B or CABLE.
O While holding in the POWER button on the remote control,
enter the code number listed in the chart on the following page
for your brand of VCR. Be sure to enter both digits of th,e code
number. If more than one number is listc,d, try the first one.
Release the POWER button.
Press the POWER button again. Your VCR should turn on. If
the VCR turns on, your remote control is now "set up" correctly.
If your VCR does not turn on, repeat the instructions, trying
each code number listed for your brand of VCR. If none of those
code numbers work, try each number, 01 through 20.
38 Chapter 3: Operating Your TV