Filter
Top Products
70
This menu is used to set the communication settings between
this unit and the external device connected.
RS-232C Setting
This item is used to remotely control this unit via a PC
connected to the RS-232C terminal.
COM/LAN1
1
RS-232C Setting
System Menu
step
1. Select the communication mode.
Remote A: Controls this unit via a PC and this unit
returns every status information.
Remote B:
Controls this unit via a PC and this unit
returns only the response to the command code.
Remote C:
Controls this unit via a PC and this unit
returns nothing.
Off: Does not control this unit via a PC.
step
2. Set the port settings shown below.
• Transmission mode
• Data bit length
• Parity bit
• Stop bit length
• Delimiter
Set all the settings to the same values as the PC
connected.
COM/LAN
System Menu
RS-485 Setting
This item is used to make the settings to use this unit with
optional keyboard connected to RS-485 terminal.
COM/LAN1
2
RS-485 Setting
System Menu
step
1. Select the recorder address.
Standalone: Does not use the optional keyboard
with this unit.
Slave ID:01 to 16: Sets the ID number of this unit
when using with optional keyboard.