Mitsubishi Electronics -LD62D Universal Remote User Manual


 
117
APPENDICES
A
Appendix 2 Details of Buffer Memory Areas
(7) CH Sampling/periodic counter flag (Un\G11, Un\G43)
When the sampling counter function or the periodic pulse counter function is selected, the operating status of
the selected function is stored in this area.
Either of the following values is stored based on the operating status.
(8) CH Latch count value (Un\G12, Un\G13, Un\G44, Un\G45)
The latch count value is stored in this area during execution of the latch counter function.
The stored value ranges from -2147483648 to 2147483647 (32-bit signed binary).
(9) CH Sampling count value (Un\G14, Un\G15, Un\G46, Un\G47)
The sampling count value is stored in this area during execution of the sampling counter function.
The stored value ranges from -2147483648 to 2147483647 (32-bit signed binary).
(10)CH Periodic pulse count previous value (Un\G16, Un\G17, Un\G48, Un\G49),
CH Periodic pulse count present value (Un\G18, Un\G19, Un\G50, Un\G51)
The previous and present periodic pulse count values are stored in this area during execution of the periodic
pulse counter function.
The stored value ranges from -2147483648 to 2147483647 (32-bit signed binary).
(11)CH Ring counter lower limit (Un\G20, Un\G21, Un\52, Un\G53), CH Ring
counter upper limit (Un\G22, Un\G23, Un\G54, Un\G55)
When the counter type is set to ring counter, the count range is stored in this area.
The setting range is from -2147483648 to 2147483647 (32-bit signed binary).
Operating status Stored value
Function stopped 0
Function being performed 1