Mitsubishi Electronics VS-45607 Projection Television User Manual


 
Connection ofTV toVCg and Antenna or
Wall Outlet Cable
Antenna/Cable Connections
I. Connect the incoming cable toANT-A
on theTV back panel.
2. Connect two coaxial cables as follows:
One from CABLE LOOP-OUT on the
TV back panel toANTENNA IN on the
VCR back panel.
One fromVCR back panelANTENNA
OUT to ANT-B on the TV back panel.
If your VCR has a video channel
OWOFF swltch_ set Itto OFF,
®®
®
Audio/Video Connections
I. Connect a video cable fromVIDEO
OUT on theVCR back panel toVIDEO
INPUT I or INPUT 2 on theTV back
panel.
If you have a S-VHS VCR, follow the
same steps, using the S-Video terminals
on the VCR and TV.
2. Connect a set of audio cables from
AUDIO OUT on theVCR back panel to
AUDIO INPUT on theTV back panel.
The red cable connects to the R (right)
channel and the white cable connects to
the L (left). If yourVCR is non-stereo,
only connect the L (left) cable.
©
OUT
OPTIONAL
_ypOc_b_e
VCRBackPanel
Ifyour VCR has
a video channel
ON/OFF switch,
set it to OFF.
TV Back Panel
o'_
o I
Wh_e
O ROd 0
v_eoc_bJo
®
II