The AV Connection Menu, continued
The AV Network
For use with compatible Mitsubishi AV
Network or ACTIVE AV Network A/V
products. With an Active AV Network
compatibleVCR, some TV and VCR
functions can be simplified to just a few
presses of the remote control buttons.
With an AV Network compatible VCR,
you can set the AV Network to Off and
still pass the remote control signal from
theTV to theVCR. For a detailed
explanation of Active AV Network, see
page 53. See the chart on page 30 to
determine the correct settings.
TV Speakers
This selection will turn on or off the
TV's built-in speakers. You may select
Off when sending the sound through a
separate stereo system or surround
sound AV receiver. See the chart on
page 30 to determine the correct
settings.
IMPORTANT
Changing theTV Speakers from OFF to ON will cause
theTV speakers to turn on. To prevent damaging theTV
speakers from a sudden increase in volume, make sure
theTV volume is turned down before choosing ON.
AV Receiver at Input I
Set toYes when you connect an AV
Receiver's video output to theTV's
INPUT I to prevent a possible "feed-
back" loop when changing the input
selection of the AV Receiver. See the
chart on page 30 to determine the
correct settings.
28