Filter
Top Products
Connection of TV to Stereo Audio System
I. Connect the audio cables from AUDIO
MONITOR OUTPUT on the TV back
panel toTV IN orAUX IN terminals on
the back of the audio system. The red
cable connects to the R (right) channel
and the white cable connects to the L
(left) channel.
2. Turn off theTV's speakers through theAV
Connection Menu (page 27-28).
3. Set the audio system's input to theTV or
AUX position to hear the TV's audio
through your stereo system.
Audio system rear terminals
TV Back patleE
of _6
o @@
®® .a_® ® @
®
Connection of TV to the Active A/V Network
To control your Mitsubishi audio and/or video products with one remote control
Connect the A/V network cable from
ACTIVE A/V NETWORK on theTV
back panel to IN on the back of a
Mitsubishi component that hasA/V
networkterminaL
Turn the ACTIVE A/V NETWORK on,
through the AV CONNECTION menu
(pages 27-29).
Check the Owner's Guide of your
added Mitsubishi components to
ensure the best possible connections.
M#subishi Component rear tem]Jna_s
TV Back Panel
®®
@@@
ACTIVEAN
NETWORK
12