Filter
Top Products
The Advanced Features Menu, continued
Advanced Convergence
Before you can adjust theAd-
vanced Convergence, you must
adjust the Static Convergence for
both Red and Blue.
I. PressA ),V or • to move the flashing bracket to a
position that needs adjustment. Press E_R tO
stop the flashing and begin the adjustment.
2. Press • I_v or • to move the red or blue line. A
position is converged when all three lines combine
to make a white line,
ENTER
3. Press _ when aligned and the bracket will flash
again. You may now repeat steps I-3 until you are
satisfied with the grid alignment.
VIDEO
4. Press _ to alternate between red and blue.
MENU
5. To exit, press O to return to the previous menu
HOME
or O to return to television viewing.
IMPORTANT
There are more than 64 line
intersections. However, the
bracket will only stop on the 64
adjustment positions.
Resetting the Factory Defaults
L
Z
.
5.
MENU
Press _ to display the Main Menu.
Press• or• to select Advanced Features.
Press E_R.
ENTER
PressAor• to select Convergence. Press _.
PressA or • to select Reset Factory Default.
PressE_ R. The message "Convergence reset
completed" will display when the defaults are
reset-
MENU
To exit, press _ to return to the previous menu
HOME ....
or _ to return to televms_on
viewing.
44