Mitsubishi Electronics VS-45607 Projection Television User Manual


 
Remote Control of the Active AV Network
The AV Network isa special feature that makes it easier to use your television and other Mitsubishi
A/V components together. When you connect the AV Network, you can point the remote control at
the television, and it will pass the remote control command to other components. You will gain even
more benefits if you have a Mitsubishi VCR equipped for the Active AV Network and a Mitsubishi
DVD player.
Before you begin, be sure you have:
Made the correct AV Network connections. Refer to "'Connection of TV to the
ActiveAV Network"in the Connections section.
Connected yourVCR to INPUT-I of yourTV and/or connected your DVD to
DVD INPUT.
Set yourVCR's remote control settings toVCR.
Turned yourVCR video mute setting on.
Turned the Active AV Network feature in the VCR and the TV's menu to ACTIVE.
Using the PLAY key on the remote, after selectingVCR with the slide switch:
Active AV Network will turn yourVCR on and begin playing a tape (if tape is
inside).
Active AV Network will turn yourTV on and switch it to INPUT-I.
When you turn your TV off, yourVCR will turn off, unless it is playing or record-
ing.
Displaying theVCR menu
When you set the remote toVCR and then press MENU:
Active AV Network will turn on yourVCR if it is off and display theVCR's menu
(this function may not work with some older MitsubishiVCR's).
Active AV Network will turn on yourTV if it is off and switch it to INPUT- I.
Using the PLAY key on the remote, after selecting DVD with the slide switch:
Your remote must be programmed to operate Mitsubishi DVD players.
Active AV Network will turn on your TV and switch it to DVD INPUT.
If your DVD player is in range of the remote and has a disc inside, the DVD
will turn on and the disc will begin playing.
IF ,MPORTANT11
When using the Active AJV Network, always point I
your remote contro at your te ev s on.
53