Mitsubishi Electronics VS-45607 Projection Television User Manual


 
Thecustom-fittedDiamondShieldisanextraprotectionfor yourtelevisionscreen.It hasaspecial
tint thatenhancespicturecontrastandfilterscolorsto enhancepicturecolorquality.It canbe
removedor installed,accordingto yourpreference.
ForVS-45607,VS-50607,andVS-60607,theDiamondShieldisanoptionthatcanbepurchased
separatelyfromyourMitsubishidealer.TheoptionalDiamondShieldisnot manufacturedwiththe
specialtint.
FormodelsthathavetheDiamondShieldalreadyinstalled,youcanremovetheshieldifyouprefer.
FormodelswheretheDiamondShieldisincludedin aseparatepackage,youcaneasilyinstallthe
shield.CarefullyremovethemaskingpaperontheDiamondShield.Thisisthecoated,scratch-
resistantsidewhichshouldfaceoutwardfromtheTV.Thenremovetheplasticsheetfromtheother
sideoftheDiamondShield.ThisistheuncoatedsidewhichshouldfaceintotheTV.
Wearcottonglovesto preventfingerprintson theDiamondShield.
Installation or removal of the Diamond Shield:
• To install optional Diamond ShieldTM:
remove the top molding clip with a small fiat head screwdriver,
pressed into the opening at the upper corner (Illustration I)
remove the bottom molding clip, with a small fiat head screw-
driver, pressed into opening at the bottom corner
after loosening corners, pull gently to remove
to install, insert shield by sliding it into the right side channel
(Illustration 2)
gently press on the shield sides to bow the screen towards you
insert the left side channel
install with the molding clips provided. Do not force.
Illustration 1 Illustration 2
61