Mitsubishi Electronics WD-62530 Flat Panel Television User Manual


 
Appendices 81 Appendices 81
Sound
Symptom Remarks
1. There is no sound even when the
volume is turned up.
Check to see if the
MUTE
button is on.
The TV’s “Listen to:” setting may be set to SAP.
Check that the TV Speakers setting is On in the Audio/Video
menu.
Perform System Reset.
2. The sound does not match the screen
picture.
The TV’s Listen to: setting may be set to SAP.
If using stereo or A/V receiver speakers, check their input selec-
tion.
If using stereo or A/V receiver, check that AUDIO OUTPUT L/R on
TV’s back panel is connected to the A/V receiver.
Appendix D: Troubleshooting, continued
Indicators
Symptom Remarks
1. Lamp indicator light is a constant red. Turn the TV off for at least 2 minutes. Turn it back on. If light is
still red, the lamp has failed. Replace the lamp cartridge. See
Appendix C for information about replacing the lamp cartridge.
If you have questions call Mitsubishi Consumer Relations at
800-322-2119.
2. Lamp indicator light is a flashing yellow. Lamp cover door is open or lamp cartridge is not secure. See
Appendix C for information about replacing the lamp cartridge.
3. Status indicator light is a steady yellow. Room temperature has exceeded proper levels. Cool the room.
4. Status indicator light is a steady/flashing
red.
Service is required. Contact your dealer or a Mitsubishi Autho
-
rized Service Center to arrange for a service evaluation. Listings
of Mitsubishi Authorized Service locations can be obtained from
our web site, www.mitsubishi-tv.com or by calling 1-800-332-2119.