Filter
Top Products
2 SPECIFICATIONS
2.5 Modes
23
2
2.5 Modes
Select the mode according to the system used for the master/local module. Depending on the mode, the addresses of storage
positions for RX, RY, RWr, and RWw differ.
List of modes
*1 This mode cannot be selected when "Station Type" under "Required Settings" is set to something other than "Master Station".
For details on modes, refer to the following.
MELSEC iQ-R CC-Link System Master/Local Module User's Manual (Application)
Mode Application Connectable slave station
Remote net Ver.1 mode To configure a new system (only with Ver.1-compatible slave stations) Ver.1-compatible slave station
Remote net Ver.2 mode • To configure a system including a Ver.2-compatible slave station
• More points are used compared to the remote net Ver.1 mode.
Ver.1-compatible slave station
and Ver.2-compatible slave
station
Remote device net Ver.1 mode
*1
• To configure a system only with Ver.1-compatible remote stations
• More remote device stations are used compared to the remote net Ver.1
mode.
Ver.1-compatible remote station
Remote device net Ver.2 mode
*1
• To configure a system only with remote stations containing Ver.2-compatible
remote stations
• More remote device stations are used compared to the remote net Ver.2
mode.
Ver.1-compatible remote station
and Ver.2-compatible remote
station
Remote I/O net mode
*1
To configure a system only with remote I/O stations Remote I/O station