Filter
Top Products
7 COMMUNICATION EXAMPLES
7.1 Example of Communications Between a Master Station and a Remote Device Station
45
7
Settings for a master station
Connect the engineering tool to the CPU module of the master station and set parameters.
1. Configure the settings of the CPU module in the following item.
[Project] [New]
2. Click the [Yes] button to add the module labels of the CPU module.
3. Set the master/local module in the following item.
Navigation window [Parameter] [Module Information] Right-click [Add New Module]
4. Click the [Yes] button to add the module labels of the master/local module.