Filter
Top Products
34
6 WIRING
6.4 T-branch Connection
6.4 T-branch Connection
This section describes how to connect the Ver.1.10 compatible CC-Link dedicated cables in T-branch.
T-branch system configuration
The following is a system configuration in T-branch.
Remote I/O station/
Remote device station
(Main line)
T-branch
terminal block/connector
Remote I/O station/
Remote device station
Local station/
Intelligent device
station
Terminating resistor
[between DA and DB]
(Branch line) (Branch line) (Branch
line)
(Branch
line)
Terminating resistor
[between DA and DB]
Remote I/O station/
Remote device station
Remote I/O station/
Remote device station
Remote I/O station/
Remote device station
Up to six stations can be connected.
Local station/
Intelligent device
station
Remote I/O station/
Remote device station
Remote I/O station/
Remote device station
Local station/
Intelligent device
station
Remote I/O station/
Remote device station
Up to six stations can be connected.
Master station
The number of branch lines is determined by the branch line length per branch line and
the overall branch line length.