Filter
Top Products
36
7 COMMUNICATION EXAMPLES
7.1 Example of Communications Between a Master Station and a Remote Device Station
7 COMMUNICATION EXAMPLES
This chapter describes programming and start-up examples of the master/local module.
7.1 Example of Communications Between a Master
Station and a Remote Device Station
This section describes an example of how to set the initial settings for the remote device station and perform an analog input
and analog output.
If an error occurs, the error code of the remote device station is stored in the device of a CPU module or the module label.
System configuration example
The following system configuration is used to explain communication between the master station and remote device station.
System configuration
Number of occupied
stations: 3
Number of occupied
stations: 3
AJ65VBTCU-68ADVN
AJ65VBTCU-68DAVN
Ver.1 compatible remote device station
(station No.1)
Ver.1 compatible remote device station
(station No.4)
Module name
Start I/O No.
Master station
(remote net Ver.1 mode)
Terminating resistor
Terminating resistor
X/Y00 to X/Y1F X20 to X2F Y30 to Y3F
R04CPU RJ61BT11 RX10 RY10R2