Filter
Top Products
14
2. Cable Connection
2-2. Connecting the Signal Cable
NOTE
•Be sure that the power switches of both the PC and the monitor are OFF.
•Refer to the PC user's manual when connecting the monitor.
1
Plug the signal cable into the connector on the rear of the monitor and
the other end of the cable into the video connector on the PC.
After connecting, secure the cable connectors with the attached screw-in fasteners.
Analog Input
Connect to SIGNAL1 (D-Sub 15 pin Connector).
Signal Cable Connector on PC PC
Signal cable (MD-C87 optional) Video Output Connector /
D-Sub mini 15 pin
• Standard graphics card
• Pow
er Macintosh G3 (Blue &
White) / Power Mac G4 (VGA)
Digital Input
Connect to SIGNAL2 (DVI-I Connector).
Signal Cable Connector on PC PC
Signal cable (DD300 enclosed) Video Output Connector / DVI
•
Exclusive graphics board (p. 39)
2
Connect the power cord to the power connector on the rear of the
monitor.
SIGNAL2
DVI-I Connector
Power cord
SIGNAL1
D-Sub mini 15 pin
Connector