Filter
Top Products
5. How to attach the optional arm
33
5. How to attach the optional arm
An optional arm (or an optional stand) can be attached by removing the stand section.
Please refer to our web site for the corresponding optional arm (or optional stand).
http://www. eizo.com
NOTE
• When attaching an arm or stand, follow the instructions of their user's manual.
•
When using another manufacturer’s arm or stand, confirm the following in advance and
select one conforming to the VESA standard.
-
Clearance between the screw holes: 100 mm × 100 mm
-
Thickness of plate: 2.6 mm
-
Strong enough to support weight of the monitor unit (except the stand) and
attachments such as cables
•
When using an arm or stand, attach it to meet the following tilt angles of the monitor.
-
Up 45 degrees, down 45 degrees (horizontal display, and vertical display rotated 90
degrees clockwise)
•
Connect the cables after attaching an arm or a stand.
•
Do not adjust the
height of the stand removed from the monitor. When adjusted without
attached monitor, it causes the personnel injury or the damaged to the stand.
•
Since the monitor and arm or stand are so heavy, dropping them may result in injury or
equipment damage.
Setup Procedure
1
Lay the LCD monitor on a soft cloth spread over on a stable surface
with the panel surface facing down.
2
Remove the stand. (Prepare a screwdriver.)
Unscrew the two screws securing the unit and the stand with the screwdriver.
3
Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
arm
English