Filter
Top Products
3. Adjustment and Settings
21
2
. Adjust the advanced setting by using <Screen> menu in the
ScreenManager.
(1) Vertical bars appear on the screen.
Use the <Clock> (p. 41) adjustment.
Select the “Clock” and eliminate the vertical bars by using the Right and Left of
the Control Buttons. Do not press the Control Buttons continuously, as the
adjustment value will change quickly and make it difficult to locate the most
suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment as
follows.
(2) Horizontal flickering, blurring or bars appear on the screen.
Use the <Phase> (p. 41) adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by
using the Right and Left Buttons.
NOTE
•Horizontal bars may not completely disappear from the screen depending
on the PC.
(3) The screen position is incorrect.
Use the <Position> adjustment.
The correct displayed position of the monitor is decided because the number and
the position of the pixels are fixed. The <Position> adjustment moves the image to
the correct position.
Select <Position> and adjust the position of the upper left corner of the image by
using the Up, Down, Right and Left Buttons in order to align the screen.
If vertical bars of distortion appear after finishing the <Position> adjustment,
return to <Clock> adjustment and repeat the previously explained adjustment
procedure (“Clock” “Phase” “Position”).
English