Filter
Top Products
60
on the screen. To display entries 64 and up, press the Pg Dn Key; and to re-
turn to previously displayed entries, press the Pg Up Key.
Note If you press F1 (Reference) at this time, a list of the screens referencing the
table entry indicated by the cursor will appear.
1, 2, 3...
1. With the cursor, select the numeral table entry that you want to edit, and
press the Enter Key.
2. Input the new value and press the Enter Key.
3. When you are finished editing, press the Escape Key.
When the Escape Key is pressed, you will be returned to the Memory Table
Selection Display.
Editing String Tables If you select character strings to edit, the following display will appear. For
the NT20M, string table entries are numbered from 0 to 31, for a total of 32.
For the NT600M, string table entries are numbered from 0 to 255, for a total
of 256. Only 32 entries are displayed on each page. Use the Pg Up and
Pd Dn Keys to scroll to other pages.
Note If you press F1 (Reference) at this time, a list of the screens referencing the
table entry indicated by the cursor will appear.
Editing Memory Tables Section 2-7