Filter
Top Products
88
4. Move the cursor to designate the area in which to paste the copy and
press the Enter Key. The area to which the copy will be made will be
designated by a dotted box when the cursor is moved.
5. Press the Enter Key again when the confirmation message appears to
paste the copy or press the Escape Key to cancel the paste and return
to step
6. Return to step 2. to make further copies or press the Escape Key to end
the copy operation.
Move Use the following procedure to move existing elements on the screen.
1, 2, 3...
1. Specify MOVE from the Cut and Paste Display
2. Move the cursor to designate the starting point of the move area and
press the Enter Key.
3. Move the cursor to designate the end point of the move area and press
the Enter Key. The specified move area will be indicated by a dotted
box.
4. Move the cursor to designate the area to move to and press the Enter
Key. The area to which the move will be made will be designated by a
dotted box when the cursor is moved.
5. Press the Enter Key again when the confirmation message appears to
execute the move or press the Escape Key to cancel the move and re-
turn to step 4.
6. Return to step 2. to move other elements or press the Escape Key to
end the move operation.
Delete Use the following procedure to delete existing elements on the screen.
1, 2, 3...
1. Specify DELETE from the Cut and Paste Display
2. Move the cursor to designate the starting point of the delete area and
press the Enter Key.
3. Move the cursor to designate the end point of the delete area and press
the Enter Key. The specified delete area will be indicated by a dotted
box.
4. Press the Enter Key again when the confirmation message appears to
execute the move or press the Escape Key to cancel the move and re-
turn to step 1.
5. Return to step 2. to delete other elements or press the Escape Key to
end the delete operation.
Edit Section 2-16