Filter
Top Products
USING LEARNING
Program the learning keys (L1~L4) to add functions that are
unique to your home entertainment devices (e.g.,VCR Tracking Up
or Down).However,there are some considerations:
• Your original remote control must be in working order for the
learning feature to work properly.
• Learned keys are mode specific,so each one can store a unique
function for each mode.
• Learned keys can be used in macros (see Using Macros on page 34).
• Although dedicated keys (L1~L4) are provided for storing
learned functions,you can also use any key (except keys for
devices and programming) for learning.However,using them as
learned keys will overwrite their original functions.
• For optimum learning,avoid high levels of ambient light such as
natural sunlight or energy-efficient fluorescent lights.
NOTE: Please have your original remote controls handy before programming
learning.Be sure to press each key within 5 seconds of the previous entry.
If not,the URC-8910 remote control will exit the programming mode.
Programming A Learning Key
1. On the URC-8910 remote control,press and hold
SET until you see the display change from the cur-
rent device and time to [CODE SET].
NOTE:The device, its code,and time are examples.Your
remote control settings may be different.
NOTE: To exit programming at any time, press
EXIT
once or
allow 30 seconds of inactivity to lapse.You will see
[EXIT
SETUP]
as the remote control returns to normal operation.
NOTE:
[INVALID]
means you have inadvertently pressed an
incorrect key.Note your error and continue programming.
2. Press the ▼ key twice until you see the display
changes to [IR LEARN].
(x 2)
NOTE:If you go past
[IR LEARN]
,press the
▲
key one or
more times to return to it.
3. Press SELECT once to begin programming.You will
see the display change to the last-selected device
(e.g.,TV).
continued on next page...
SELECT