Filter
Top Products
USING MACROS
With programming,the M1 through M3 keys on your URC-8910
remote control can be setup to perform repetitive,time-consuming
operations for easy,convenient access through the press of a single
key.Macro keys are ideal for home theater operations,setting a
favorite channel,guide steps,or other multiple functions you would
like to control with one key press.Moreover,each macro key can
hold up to15 key presses total.
NOTE:Programming a new macro over an existing one will erase the
original macro.
Programming A Favorite Channel
With so many channels available through your cable or satellite
system provider, you can program a macro that directly selects a
favorite channel with one key press.For example,let’s assume your
favorite cable programs are on channel 71.Perform the following
steps to program a macro key for direct access of this channel:
NOTE:This example assumes the TV tuner is connected directly to the cable
line and not through a cable converter.
1. On the URC-8910 remote control,press and hold
SET until you see the display change from the cur-
rent device and time to [CODE SET].
NOTE:The device, its code,and time are examples.Your
remote control settings may be different.
NOTE: To exit programming at any time, press
EXIT
once or
allow 30 seconds of inactivity to lapse.You will see
[EXIT
SETUP]
as the remote control returns to normal operation.
NOTE:
[INVALID]
means you have inadvertently pressed an
incorrect key.Note your error and continue programming.
2. Press the ▼ key six times until you see the display
change to [KEY MACRO].
(x 6)
NOTE:If you go past
[KEY MACRO]
,press the
▲
key one or
more times to return to it.
3. Press SELECT once to begin programming.You will
see the display change to [SEL MACKEY].
4. Select an open macro key (e.g.,M1) and press it
once.You will see the display change to [ENTER SEQ].
SELECT
34