Filter
Top Products
After programming,press M1 ~ M3 once to
run a desired macro (see Using Macros on
page 34).
After programming,press L1 ~ L4
once to activate a learned function.
(See Using Learning on page 29.)
Use to turn on or off the key backlight.
When this feature is activated,keys will
remain backlit for 5 seconds after the last key
press.In the setup mode,backlighting
will remain on for 30 seconds.
Use SET for all programming sequences.
Satellite Receiver Functions
Press SAT once to control your satellite
receiver.
Press POWER once to turn on or off the
selected device (e.g,SAT).
Press MENU once to display your satellite
receiver’s main menu.
Use GUIDE to display your satellite receiver’s
program guide or setup menu.
Use EXIT to exit from your satellite receiver’s
guide or menu.
Use INFO to display the satellite receiver’s
current channel and program information.
Use the cursor keys (▲,▼,or) to move
the cursor in the satellite receiver’s program
guide and menu screens.Use SELECT to
choose options from the menu or guide.
Use VOL+ (or VOL-) to raise (or lower) the
satellite receiver’s audio volume (if applicable).
Press MUTE once to turn the satellite receiver’s
audio off or on (if applicable).
Use FAV to scan favorite channels and/or all
channels.(See Using Channel Scan and Program-
ming Favorite Channel Scan on page 41.)
continued on next page...
▲
▲
SELECT
S
U
R
R
O
U
N
D
S
O
U
N
D