One for All (URC-8910) Universal Remote User Manual


 
Use to turn on or off the key backlight.
When this feature is activated,keys will
remain backlit for 5 seconds after the last key
press.In the setup mode,backlighting
will remain on for 30 seconds.
Use SET for all programming sequences.
DVD Player Functions
Press DVD once to control your DVD player.
Press POWER once to turn on or off the
selected device (e.g,DVD).
Press MENU once to display your DVD player’s
main menu.
Use GUIDE to display your DVD player’s
program guide.
Use EXIT to exit from your DVD player’s guide
or menu.
Use INFO to display the DVD player’s current
channel and program information.
Use the cursor keys (,,or) to move
the cursor in the DVD player’s program guide
and menu screens.Use SELECT to choose
options from the menu or guide.
Use VOL+ (or VOL-) to raise (or lower) the
DVD player’s audio volume (if applicable).
Press MUTE once to turn the DVD player’s
audio off or on (if applicable).
Use FAV to scan favorite channels and/or all
channels.(See Using Channel Scan and
Programming Favorite Channel Scan on page
41.)
Use the keypad (1 ~ 9 and 0) to
directly select chapters (e.g.,09 or
31).If the original remote control
required pressing an Enter key to
select a chapter,also press the ENTER
key after the chapter number
(e.g.,3-1-ENTER).
continued on next page...